Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who appreciates the convenience of gas cooktops but needs an oven for baking? Discover a dual fuel range cooker that gives you the best of both worlds.
Many home chefs with experience prefer gas cooktops due to their superior temperature control and capacity to employ sophisticated cooking techniques, such as grilling. These powerful stoves can be costly, especially if they require an extra gas connection and an electrician for installation.
What is a 13amp plug?
If you own dual fuel range cooker (also known as an electric and gas oven) then you'll require an appropriately rated 13 amp plug. The plug also needs to be hard-wired into the cooker circuit ring by a qualified electrician.
This ensures that the current flowing through the plug doesn't exceed the limit of safety which could cause an electrical fire. The plug is equipped with a fuse that controls the current. The fuse goes out as soon as the current flows through it over its capacity, which safeguards the appliance from overcharge of electricity.
The fuse is rated at 13 amps as shown on the top of the plug. this indicates the maximum current that the plug can pass without causing damage to the appliance or overheating the socket. It is essential to ensure that when replacing fuses, you always use the same rated amperage as the original. If you replace the fuse using one with the different ratings, you run the risk of overheating the socket and possibly putting yourself and others in high risk.
A 13 amp fuse is likely to be a type of ceramic, which is very durable and is able to withstand high temperatures produced by the range cooker. The ceramic element is also fire-proof, making it a more suitable choice than other types of fuse.
There are several ways to install an 13 amp plug. It can be connected to an existing live socket, and the flex is then connected to this by an screw or a plastic jaw-type cord clamp. The clamp on the cord should be tightened after the plug is tightly pushed into place.
Some plugs include a wiring diagram on cardboard over the pins and these must be removed prior to connecting the wires. The wires need to be cut to the proper length, as if they are too long they can get crushed when the plug covers are replaced. The earth wire must be the longest one to ensure that it is connected prior to the neutral and line pins.
How do I install the 13amp plug?
The vast majority of dual cookers that use fuel in the UK are equipped with an amp rating of 13 amps. This is crucial because ovens can draw significant current, and standard plug sockets only have a 10-amp rating.
Generally speaking, new appliances must be equipped with an outlet at the time of purchase and it is all in keeping with the Plugs and Sockets etc (Safety) Regulations 1994. However, older appliances may not be connected to the plug, and this is where the issue arises.
When connecting a cooker to an existing plug socket the first thing to do is to make sure that the rating of the fuse in the box is in line with the plug's rating. This is crucial since a faulty sized fuse could pose a risk.
It is also recommended to ensure that the fuse is set in the cartridge and there isn't any movement within it. Next up is to prepare the flex to be used. Remove the sheathing to expose the three conductors that are insulated. Then, cut the sheathing near the entry point to the plug (beyond the cord grip) with a utility knife, but without damaging the individual conductors that are insulated. This nick must be large enough to allow for the sheathing and cable to separate when the sheathing is pulled back. Finally cut off the excess sheathing, leaving about 40mm over the flexing end.
This flex is placed over the plug, with the earth terminal at the top and the live and neutral terminals at the bottom. The sheathing of each pin is removed using the conductors in the colour of the wire as a guide. The internal cable is then secured to the terminal by with the help of the cord grip. If the plug is equipped with an attached cord clamp that is screw-type, let it loosen and then pull the insulation back to reveal the copper wires. Connect each insulated wire to the correct terminal by using the channel inside the plug. Start with the earth conductor first, then the neutral and then the live.
What is the maximum current draw of a plug with 13amps?
The maximum current draw for a 13amp plug is 3kw at 230 volts. This is a lot of power but the standard fuse on a UK plugtop won't fail until the cable reaches a hazardous temperature. It is crucial to be aware of the amount of power you are using in your kitchen, as a defective plug or socket can cause an explosion.
range style dual fuel cookers used in plugtops weigh around 25mm and are rated for 240V mains. They'll feature a BS kitemark or similar marking on the side and will contain sand. Alternatives to glass or plastic are available, but should never be used in combination with a live plug.
The majority of dual fuel range cookers in the UK require hard-wired and cannot be plugged directly into an outlet on the wall. They are typically connected through a separate cooker circuit which is only suitable for appliances that can handle up to 20 amps.
Check the ring circuit of your home with the fuse box, or contact an electrician nearby. Ask whether the sockets are on the same ring or if they're distinct. They should also be able tell you if there is a separate circuit to power your oven.
If you're in the market for a brand new dual fuel range cooker, the size of your kitchen is an important factor to consider. We offer a broad selection of cookers that can be adapted to any space. Choose from small 50-60cm dual-fuel models, or the huge 90cm+ double oven options from leading brands like Rangemaster and StovesAreUs.
If you're after something different do not worry - we also have a wide selection of electric and gas multi-function cookers. These versatile machines let you cook a variety of meals, such as pasta, casseroles and curries.
Explore our full range of Cookers in Currys online or head in-store for a look. We provide free home installation and delivery on certain range cookers as well as flexible payment options. If you have any queries, our team are ready to assist you - just drop us an email or give us a call. second hand dual fuel range cookers is subject to status and terms and conditions apply.
What is the most draw for the switch on a cooker?
There is a lot of confusion regarding the maximum current draw of the cooker switch. Most cookers are hard-wired, and connected to a dedicated oven-ring circuit, not an ordinary socket. This is because they typically consume more than 20 amps when the gas hob and electric oven are in use.
There aren't any dual fuel range cookers that can be installed in a standard socket, as this would pose a significant fire risk and would violate electrical regulations. A professional electrician will always install any new electrical components to a cooker in the kitchen and will make sure that the total load (both the oven and hob) does not exceed the supply capability of the circuit.
Dual fuel range cookers combine the responsiveness of a gas stove with the precision and accuracy of an electric oven. They are therefore popular with chefs as well as home cooks. Dual cookers that use fuel are great to experiment with different cooking techniques, including searing or charcoaling.
When purchasing a new range cooktop, you need to take into consideration a variety of factors, including size, functionality and price. Additionally, you'll be required to ensure that your house has the right gas hook-up for the appliance. If you aren't sure you are not sure, hire an appointment with a Gas Safe engineer to inspect your home prior to installation.
Currys dual fuel range cookers are available in a range of models to meet all budgets. From affordable models by Indesit and Zanussi, to our own Essentials collection. If you're seeking something more sophisticated we have a selection of premium JennAir models, which feature a number unique features.
It is essential to read the instruction manual for the owner prior to purchasing a dual fuel range cooker. It will provide you with specific details regarding the electrical and gas requirements. You will require a gas connection in your home. A plumber might be required to connect it for you. It is also possible to require an individual cooker-ring circuit installed by an experienced electrical engineer.